You can set up a bucket garden practically anywhere and cultivate flowers, perennials, vegetables, fruit and even shrubs there even without your own garden. However, such a planter can become very heavy, which makes moving it from time to time a challenge - this is especially true for large, floor-standing houseplants that occasionally need to be moved. With a plant trolley under the plant pot, you can make this task much easier.
Heavy buckets are best moved with a plant trolley
Our recommendations
our recommendation
WAGNER plant trolley PALETTI 34 x 34 x 8 cm I plant trolley for indoor use, natural beech I flower trolley made of FSC solid wood I bucket trolley made of wood I load capacity 100 kg I Made in EU - 20033501
6.99 EUR To the product| material | solid beech wood |
|---|---|
| surface | untreated, for indoor use |
| shape | square |
| roll | 4 double rolls |
| color | pale wood |
| Dimensions | 34 x 34 x 8 centimeters |
| carrying capacity | up to 100 kilograms |
This plant trolley initially scores with its low price. For this you will receive a roller board made of solid, untreated beech wood. You can leave it as it is, but a water-repellent coating or glaze increases the service life considerably - after all, the product will probably come into contact with water more often. The beech wood used is FSC-certified, i. H. it comes from sustainably operated forestry. The four double wheels made of hard plastic are already pre-assembled upon delivery. You can load this plant trolley with buckets up to a weight of 100 kilograms.
our recommendation
Metafranc WPC plant roller 300 x 300 mm 60 kg load capacity anthracite PP wheels with locks weather-resistant/outdoor roller/coaster with wheels/transport aid for plants/825110
17.99 EUR To the product| material | Wood Plastic Composites (WPC) |
|---|---|
| surface | water-repellent, for indoor and outdoor use |
| shape | square |
| roll | 4 castors made of polypropylene, with 2 parking brakes |
| color | black |
| Dimensions | 30 x 30 centimeters |
| carrying capacity | up to 60 kg |
This plant trolley is made of weather-resistant and water-repellent WPC, which makes it suitable for both indoor and outdoor use. WPC is Wood Plastic Composites, a mixture of plastic and wood fibers. The material is splinter-resistant, more robust and more durable than wood, but has its natural look. The surface is corrugated so that the planters do not slide back and forth when you move them.
You move the roller board using four small swivel castors made of polypropylene (PP, hard plastic), two of which have an integrated parking brake. With this, the plant trolley always stays in its predetermined place and does not roll off by itself. However, customer reviews complained that the rollers were too small and would therefore get caught on small bumps.
our recommendation
WAGNER plant roller Alaska Ø 38 x 7.5 cm I flower roller for outdoor + indoor use I bucket roller aluminum I 2 total locks I load capacity 150 kg I Made in Germany - 20700201
38.04 EUR To the product| material | aluminum |
|---|---|
| surface | ribbed, non-slip |
| shape | around |
| roll | 4 hard plastic castors, 2 of which have brakes |
| color | aluminum |
| Dimensions | Diameter 38 centimeters, height 7.5 centimeters |
| carrying capacity | up to 150 kg |
If you want to place slightly larger and heavier plant pots in your home, on the balcony or terrace, this model is best used as a rolling coaster. The plant trolley from the quality manufacturer Wagner is made of non-slip corrugated aluminum on the surface, the plate has a diameter of 38 centimeters and is approx. two millimeters thick. The load capacity is up to 150 kilograms. The flower trolley is moved using four soft plastic castors, two of which have stable parking brakes. With these you can move the product even on sensitive surfaces without fear of damage to them.
Purchase Criteria
material
wood: Wood types such as beech, alder and pine are mainly used for wooden plant trolleys, although hardwoods such as beech should be preferred. As a rule, the floor panels consist of several slats attached next to each other. Models with solid base plates, on the other hand, are less common. Many wooden plant rollers are untreated, which is why you have to use the brush yourself. Applying a varnish or glaze increases the lifespan of the product considerably.
metal: Aluminum, cast iron or steel are mainly used for metal plant trolleys. It is important that the material does not rust - otherwise there could be a nasty surprise. Aluminum plant rollers are often solid and have a ribbed, non-slip base plate. Steel models, on the other hand, can be made of chromed steel wire or consist of a cross made with two coated steel rails. Sometimes these can be extended so that you can enlarge the wing if necessary. Cast iron plant trolleys, on the other hand, are very different in their design, sometimes playful, sometimes rustic.
WPC: WPC - Wood Plastic Composites - is a material made of plastic and wood fibers. Depending on the manufacturer, the wood content is between 50 and 90 percent. Plant trolleys made of WPC look like wood, but are more robust and therefore more durable than real wood. Flower rollers made of other plastic, such as polypropylene, are significantly less robust and less resilient.
Glass: Plant trolleys made of glass, which can be used both indoors and outdoors, have a modern look. Make sure that the product is made of safety glass so that the material does not break and someone is injured by glass splinters. In contrast to wooden flower trolleys, the models with a glass plate are less stable. They can usually load you up to a maximum of 75 kilograms.
castors and parking brakes
As a rule, the wheels of a plant trolley are made of hard plastic, but this can be a problem with more sensitive floor coverings. The hard material causes scratches and other unsightly areas. It is therefore better to switch to soft castors. Also, make sure the reels are nimble and not too small: small reels tend to get stuck all the time. Parking brakes are also an important feature, especially if the roller board is to be used outside. Brakes prevent the plant trolley from moving unintentionally, for example in windy conditions.
carrying capacity
Depending on the material and processing, different plant trolleys have different load limits. Before you buy, be sure to pay attention to the specified maximum load capacity, which should be as high as possible for large and heavy buckets - some models can handle up to 250 kilograms. If the planter is too heavy for the roller board, it can simply break and thus affect the plant.
dimensions and shape
Plant trolleys are either square or round, with some models being rectangular in shape. These are suitable for planters, while round and square shapes will suffice for most planters. The size of the base plate depends on that of the bucket that is to stand on it. The bucket must always be in the middle of the plate, and the plate should be slightly larger than the planter. Both are for stability. Flower rollers are available in many different sizes. Flat models are particularly inconspicuous, with castors hidden underneath the tabletop.
surface
A smooth surface may look nice, but it is not non-slip and can therefore cause the planter to slip when moved. Therefore, give preference to floor tiles with a ribbed, rubberized or otherwise non-slip surface.
youtubefrequently asked Questions
What do you need a plant trolley for?
Whether in the apartment or on the balcony, very large plants occasionally have to be moved. For example, to find a more suitable location, to get the plant out of the rain, to move it to winter quarters or simply because you want to clean the area in question. With the plant trolley, you can move the heavy tub back and forth as you like and without much effort. Furthermore, plant rollers protect the floor covering, at least if the corresponding soft rollers are attached.
Which manufacturers offer high-quality plant trolleys?
You can get high-quality plant trolleys from Wagner, for example. Behind it is a family business based in the Black Forest, which offers a wide range of different models in all sizes and colors. Plant trolleys that are particularly flat and only about three centimeters high are available from the companypunch. These are made of robust WPC and have a load capacity of up to 120 kilograms. Other well-known manufacturers of flower boards are Elho, Esschert Design and Metafranc.
Where can you buy plant trolleys?
You can buy plant trolleys practically anywhere. They are available in hardware and garden stores, sometimes as an offer in discounters or in large furniture stores such as the well-known Möbel Sweden. However, the cheap no-name products are often of inferior quality, so you should attach importance to high-quality and durable branded products. You can get these in both stationary and online stores, with the latter offering a larger selection and better comparison options.
How much do plant trolleys cost?
The price of plant trolleys varies and depends heavily on the manufacturer and the material used. You can get simple roller boards made of wood for around five euros, while models made of cast iron or aluminum can cost up to 30 euros. The size of the plant trolley also determines the price: Larger models with a higher load capacity are more expensive than small bucket trolleys.