Help the development of the site, sharing the article with friends!
Not every garden has room for a swing frame or a self-made swing. Even a tree with a stable, straight branch does not stand everywhere. But maybe you have the opportunity to hang a swing between two trees.
A swing can be hung on one or two trees
The trees selected should be healthy and strong. Also, they should not be too far apart. The greater the distance, the more difficult it becomes to properly stretch a rope between them. However, sufficient tension is important for the stability and safety of the swing. You can then attach the swing to the taut rope.
How can I attach a swing?
If you want to attach a swing between two trees, you first need a horizontal way to hang it up. Two strong branches at the same height would be ideal. Alternatively, they stretch a sturdy rope between the trees. This can be a climbing rope, but a heavy-duty harness with a special tensioning device is more suitable.
What do I have to consider?
Make sure your children are as safe as possible when swinging. Check if the tree(s) is/are really stable. Try hanging on the branch that will support the swing. If it bears your weight without any problems, then it will probably also withstand a rocking child. Never hang a swing on a rotten or storm-damaged tree!
In order not to damage the tree or trees on which the swing is hung, you should attach a pad. For this you can use an old carpet or strips of rubber (car tire or floor mat cut into strips). Place these under the tension rope.
Check the stability of the tether and swing regularly, at least every spring. If there is the slightest doubt about safety, then replace the tension rope or the swing ropes immediately.
The essentials in brief:
- select healthy strong trees
- the smallest possible distance between the trees
- Fasten the tension cable horizontally
- stretch tight
- hang swing
- Check the tension rope and swing regularly
- replace ropes if necessary
tips
Before attaching a swing to a tree or between two trees, be sure to check the stability of the trees or branches in question.