With finished paving slabs, you can pave wide garden paths or just lay them as individual stepping stones. You can find the plates in the trade made of plastic or concrete. You decide which plates and which way is the best choice for you.

Paving tiles can be used in many different ways

One of the cheaper sidewalk variants is a path made of plain concrete slabs. On the other hand, natural stone slabs are much more decorative, but also more expensive, and you can buy them in various designs in hardware stores. Plastic paving slabs are also cheap right now. On the other hand, they are easy to carry and transport due to their low weight.

When does a paved garden path make sense?

Paths that are used very frequently are mostly fully paved. This includes, for example, the route from the garden gate to the front door. That also makes sense, because this path should be safe to walk at any time and in any weather, even for strangers like the postman.

A paved path is easy to push snow on and it doesn't get muddy or slippery from heavy rains. In this way, as little dirt as possible is carried into the house. If the slabs are laid evenly, there are no tripping hazards along the way. Even cleaning such a path is quite simple. A paved path is therefore comfortable and easy to maintain, but a little more complex to produce.

When are individual stepping stones best?

Individual stepping stones are suitable, for example, for relatively little-used paths or for lawns. If you often walk the same path across your lawn, a "trail" will develop there over time. The grass grows slowly at this point and soon a bare path can be seen. Then at the latest you should think about a path made of stepping stones.

If the stepping stones are laid correctly, they won't get in the way when you're mowing the lawn. So make sure you place them at ground level. Compared to a fully paved path, one made of stepping stones is much cheaper and more flexible. You don't have to create a substructure and can later place individual slabs in different places or change the course of the path completely.

Can I cast paving slabs myself?

If you don't like the paving slabs on the market or you just want to use your creativity and skill, then you can cast paving slabs yourself. For this you need a mould, dry concrete, water and well-fitting work gloves. A simple square frame made of slats is suitable as a mold. If you want to make a lot of panels, it is best to use several frames, otherwise the work will take an extremely long time.

Opportunities for paving slabs:

  • finished concrete slabs
  • plastic panels
  • various natural stone slabs
  • Pour paving slabs yourself

tips

If you are reasonably handy and have enough time, then pour your paving slabs yourself. Your garden path is sure to be unique.

Category:

Garden design