- How wide is a red beech hedge at least?
- This is how you quickly get a wide red beech hedge
- What else to look out for when it comes to the width of the red beech hedge
How wide a red beech hedge will be depends on the space available and your personal taste. However, note the minimum width required for a beech hedge. If possible, consider the later width of your red beech hedge during the planning phase.
The minimum width of a red beech hedge is around 40 cm
How wide is a red beech hedge at least?
You determine the width and height of your red beech hedge yourself. You can cut the hedge narrow or wide as you like.
- Minimum width between 40 and 50 centimeters
- Minimum height around 70 centimeters
- maximum hedge height about 4 meters
The minimum width of a red beech hedge is 40 to 50 centimeters. You should not cut beech hedges narrower. If you want a very wide hedge, you can easily make it a meter or more wide.
If you have little space in the garden, you should consider planting a hornbeam hedge. You can cut hornbeams as narrow as a board if you want.
This is how you quickly get a wide red beech hedge
It takes time for a red beech hedge to reach a width of one meter or more. But you can speed things up.
Plant the red beech hedge in two rows. Two rows are created at a distance of 50 centimeters. The red beeches are planted staggered.
Due to the branches, the space in the middle quickly becomes dense and you get a very thick hedge in a short time. Incidentally, later you can hardly see anything of it if you regularly cut the beech hedge.
What else to look out for when it comes to the width of the red beech hedge
The wider the beech hedge, the more difficult it is to care for it, especially cutting it.
You can hardly work a width of one meter or more from the ground. Cutting is then only possible with a ladder or scaffolding and is therefore very time-consuming.
Also think about the distance between the beech hedge and buildings and sidewalks. Leave enough space so that you can also cut the hedge from behind without any problems.
tips
Beech hedges should be cut conically. This means that the hedge is kept wider at the bottom than at the top. As a result, the lower parts of the plant receive more light and do not bare as quickly.