Assembly gloves are special work gloves that are an indispensable part of the protective equipment in many trades. But also in the private sector, for example if you are enthusiastic about DIY in your own workshop, high-quality assembly gloves should not be missing. In this small buying guide, we will introduce you to some recommended models and also explain the most important purchase criteria.
Assembly gloves are available in many different materials
Our recommendations
our recommendation
Würth assembly gloves, 12 pairs, size 10, economy mechanic's work gloves, construction gloves, nylon gloves
28.49 EUR To the product| packaging | 12 pairs |
|---|---|
| size | different |
| material | nylon |
| color | grey black |
In the segment of work and assembly gloves, the Würth company is one of the leading suppliers in Germany. Here you are offered a package with a total of 12 pairs of high-quality economy mechanic's gloves, which are made of supple nylon and are available in different sizes. In their reviews, Amazon customers are very satisfied with the product and praise both the quality and the price-performance ratio. The gloves are very thin, so that sensitivity is maintained even when working with small parts.
our recommendation
Work glove MULTI-FLEX | Size 9 (L) | Nylon fine knit with nitrile microfoam coating | 1 pair
3.79 EUR To the product| packaging | 1 pair |
|---|---|
| size | different |
| material | Nylon with nitrile microfoam |
| color | black/ grey |
This light but high-quality assembly glove from the manufacturer Gebol consists of seamless nylon fine knit coated with nitrile microfoam. In addition, the glove has nitrile nubs for more grip. Amazon customers describe this assembly glove in their reviews as very flexible and well-fitting, with a secure grip and a good sense of touch even with smooth objects. The very thin material tested according to Ökotex Standard 100 shows very good resistance to oils and other fats, which is why the product can be used for any work on the construction site, in the car workshop, in the garden and in the agricultural sector, etc. The Gebol assembly gloves are available in sizes M, L, XL and XXL and in different packaging.
our recommendation
ATG protective glove MaxiflexUltimate 34-874 size 9 EN388 category II Contents: 5 pairs
17.45 EUR To the product| packaging | 5 pairs |
|---|---|
| size | different |
| material | with nitrile microfoam coating |
| color | grey black |
Just like the previously presented work gloves from Gebol, the ATG Maxiflex(R)Ultimate protective glove also meets EN 388, which regulates the protection of gloves against mechanical injuries. These assembly gloves also consist of a seamlessly knitted fine fabric with a nitrile microfoam coating. The model is particularly suitable for dry conditions in many areas. According to the excellent customer ratings on Amazon, this glove has a high level of flexibility and fit and enables very good tactile sensitivity, even for fine work. The protective glove is available in four sizes (8/M, 9/L, 10/XL and 11/XXL).
Purchase Criteria
purpose of use
Before you buy assembly gloves, you should check whether the selected model is also suitable for the intended purpose. Some protective gloves are designed to protect against mechanical injuries (e.g. cuts, splinters, blisters), while others are designed to protect against thermal demands such as heat (e.g. burns) or chemical burns. It is also important to know whether the assembly glove is only suitable for dry or wet work.
material
Depending on the intended use and requirements, assembly gloves are made of different materials.
fabric or cotton: Use as undergloves that are pulled under the actual work gloves to protect against the cold.
Coated fabric: Used in many areas, depending on the coating, often fine knit nylon with any coating
leather: widespread, very good protection against stabs and cuts, good protection against heat and cold, very durable and flexible, often lined with a Kevlar or other lining
Aluminized assembly gloves: for working in high heat, e.g. B. welding work or on furnaces and forges
Kevlar assembly gloves: light and very durable, at the same time resistant to cuts and punctures
rubber or latex: Use for chemical and liquid resistant protective gloves, e.g. B.
coating
Classic assembly gloves are provided with a coating of latex, nitrile, polyurethane or PVC, which is intended to protect the hands from liquids and chemicals (e.g. acids) to a certain extent. However, the protective effect is only given with occasional, short-term use and not with long-term use - there are special protective gloves for this. Also note that these coatings are not insulating and therefore allow cold to pass through.
size and fit
In order for assembly gloves to be able to fulfill their protective function, they must fit you exactly and be as tight as possible. This means they must be neither too small (little freedom of movement and comfort) nor too large (do not protect properly). For this reason, one-size-fits-all protective gloves are not a good idea, and women's and men's sizes should also be offered. After all, many women have smaller and more delicate hands than men and therefore also need smaller glove sizes.
comfort and handling
It is also important that the material protects your hands well - and at the same time you are not significantly restricted in your freedom of movement and your sense of touch. Tight-fitting assembly gloves made of high-quality but thin fabric meet this requirement, in contrast to coarse materials or gloves that are simply too big.
Certification and DIN standards
Assembly gloves are often a mandatory part of work clothing as part of personal protective equipment (PPE). As such, you must meet certain standards required by law, which must not be disregarded in a professional setting. This includes, for example, the EN 388 standard, which defines protection against mechanical injury, and the EN ISO 374 standard for chemical protective gloves. EN 407, on the other hand, regulates the requirements for protective gloves against thermal risks, and EN 511 for cold risks. On the other hand, you need protective gloves with electrostatic properties , the EN 16350 standard is relevant.
youtubefrequently asked Questions
What are assembly gloves?
Assembly gloves are a specific form of work gloves designed to protect hands from mechanical or chemical injury. At the same time, however, these gloves should be so flexible that even delicate work that requires precision can be carried out with a good instinct. Assembly gloves must meet certain requirements laid down in legal standards.
When do you need assembly gloves?
In short: You need work or assembly gloves when you need to protect your hands from mechanical or chemical injuries. This can be the case in many areas, such as gardening (use of pesticides or mineral fertilizers!), in the home workshop, in agriculture, in the automotive sector, in manual work (e.g. carpentry work) and much more more.
Can I also use assembly gloves without certification?
If you use the assembly gloves for professional, i. H. professional environment, these must meet the DIN standards listed below. Otherwise, you or your employer could face significant legal problems in the event of an accident. In the private sector, however, you are free to choose protective gloves with or without certification. However, we advise you to do so, as this is the only way to guarantee the desired protective effect.
I have a latex allergy. Which assembly gloves should I use?
If you have a latex allergy, you must avoid this material - and therefore also latex-coated assembly gloves. Instead, choose nitrile-coated models, which are already widely used in this area. By the way: people with a latex allergy should also avoid caoutchouc (natural rubber), as this is the raw material for latex.
Can assembly gloves be washed?
You can wash assembly gloves, but you should not do this in the washing machine. The gentlest way to clean the gloves is to hand wash them at a maximum of 40 degrees Celsius with a standard detergent. Wash them in it for ten minutes, then rinse with cold water and repeat if necessary.
Which well-known manufacturers produce high-quality Monday gloves?
Well-known and proven manufacturers of assembly gloves are u. a. Würth, Gebol, Engelbert & Strauss and ATG. These are often used in professional environments, so you can be sure that the desired protection is actually given.