Carnivorous plants do not tolerate lime at all. There is always too much lime in tap water. You should therefore only use rainwater as water. What else you need to consider when watering carnivores.

Carnivorous plants should not be watered with tap water

Water carnivorous plants with rainwater

Lime is the death of nearly all carnivore species. Watering with rainwater is therefore the best thing you can do for your carnivorous plants. It contains no lime and sufficient minerals for healthy plant development.

If you don't have rainwater to hand, you can use still mineral water as a substitute. Distilled water also works if necessary.

To remove limescale from tap water, simply letting the water stand or boiling it is not enough. Therefore, do not use tap water when watering.

Water carnivores using the watering method

Carnivorous plants should never dry out completely. However, they do not tolerate waterlogging either. Therefore, it is best to water carnivores using the damming method.

To do this, place the pot in a higher saucer. This is filled with rainwater until the water level is about two centimeters high. If the moisture has been completely absorbed by the substrate, wait two days and then pour rainwater into the saucer again.

Do not water plants directly

When watering, avoid watering the above-ground parts of the plant.

If the humidity in the room is too low, you can increase it a little by placing bowls of water on the radiator or window sill.

Ventilate regularly so that no mold can form due to the high humidity.

tips

Carnivorous plants thrive best in high humidity. Larger species such as pitcher plants should therefore be regularly sprayed with water. This is not necessary for other varieties.

Category:

Vegetable garden